SOETECK SY-LI Series 48V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement

The SOETECK SY-LI Series 48 V LiFePO4 Battery is a purpose-built replacement for traditional lead-acid blocks. Leveraging lithium iron phosphate chemistry and an integrated smart BMS, the module delivers high cycle life, rapid CC/CV charging, and dependable performance across harsh temperature ranges. Its reduced weight and compact form factor simplify installation in mobile, stationary, and backup power systems while lowering total ownership cost through longer service intervals and minimal self-discharge.

No data available
   

Product Overview

SOETECK SY-LI Series 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement is engineered as a drop-in solution for motive-power and stationary applications that previously relied on lead-acid blocks. Built around a robust LiFePO4 chemistry, the unit delivers 4.8 kWh of usable energy at a nominal 48 V / 100 Ah, while weighing only 37.5 kg—approximately one-third of an equivalent lead-acid pack.

A highly integrated Battery Management System safeguards every cell, balancing charge and regulating current up to 100 A continuous or 100 A pulse. The pack sustains ≥ 3000 cycles at 0.5 C and 80 % DOD, translating into an expected service life of five to ten years under normal conditions. Self-discharge is held below 3 % per month, minimising downtime in seasonal or standby roles.

Its rugged construction (IP6X ingress rating, operating range –20 °C to 55 °C) supports indoor and outdoor deployment, from AGV drive trains and recreational-vehicle house banks to solar-hybrid storage cabinets and critical emergency reserves. By combining high cycle life, low maintenance and rapid CC/CV charging, the SOETECK SY-LI Series 4.8 kWh 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement offers a clear pathway to lower total cost of ownership and improved system uptime for industrial and commercial operators.

Product Features

High Energy Density in Compact Form

  • 4.8 kWh nominal energy in a 522 × 240 × 218 mm footprint
  • 37.5 kg net weight—about one-third of comparable lead-acid
  • Space and payload savings for mobile and rack-mount systems

Long Cycle Life & Reduced Maintenance

  • ≥ 3000 cycles at 0.5 C, 80 % DOD, 25 °C
  • Projected service life of 5–10 years
  • Lower replacement frequency cuts operating expenditure

Smart BMS Safety & Control

  • Integrated low-power BMS with cell balancing and protection logic
  • 100 A continuous / 100 A pulse current handling
  • Automatic shutdown on over-voltage, over-current or temperature faults

Wide Operating & Storage Window

  • Charge: –10 °C to 55 °C; Discharge: –20 °C to 55 °C
  • ≤ 3 % month self-discharge at 25 °C
  • IP6X enclosure resists dust ingress for harsh environments

Flexible System Integration

  • Direct CC/CV charging at 53.5 V (rec.) to 42 V cut-off
  • Series connection up to 2 packs; parallel when voltage Δ ≤ 2 V
  • Drop-in form factor for lead-acid replacement without redesign

Typical Applications

  • Data Centers
  • Telecommunication Base Stations
  • Automated Guided Vehicles
  • Recreational Vehicles
  • Outdoor Surveillance Power
  • Emergency Backup Systems
  • Solar Energy Storage

Model Overview

Within the SOETECK SY-LI Series 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement range, the current model—internally designated LUB48100PA—offers a balanced specification of 48 V / 100 Ah, 100 A continuous discharge and an IP6X shell for dusty industrial sites. Its compact 522 × 240 × 218 mm housing and 37.5 kg mass simplify retrofits where space and weight are limited. Should future capacity variants be added, each will maintain the same BMS architecture and connection rules (series ≤ 2, parallel voltage Δ ≤ 2 V) to ensure seamless mixing within larger battery banks.

ModelsNominal VoltageRated CapacityLengthWidthHeightTotal HeightAppox.Weight
SY-LUB48100PA48V100Ah522mm240mm214mm218mm37.5kg

Product Specifications

Data coming soon! Please revisit this page later, or reach out to us for additional details.

Product Brochure

Find supports from SOETECK teams

We offer 24/7 customer support—not just to sell products, but to provide comprehensive assistance.
Our dedicated team is always ready to help with quotes, tailored consultations, and expert advice on product selection.

If convenient, please share your industry background or specific application, along with the products and services you’re interested in.This information will help us provide you with a more personalized solution and accurate quote.

Product Page Form - 1 (#13)