En SOETECK SY-LI Series 48 V LiFePO4 Battery is a purpose-built replacement for traditional lead-acid blocks. Leveraging lithium iron phosphate chemistry and an integrated smart BMS, the module delivers high cycle life, rapid CC/CV charging, and dependable performance across harsh temperature ranges. Its reduced weight and compact form factor simplify installation in mobile, stationary, and backup power systems while lowering total ownership cost through longer service intervals and minimal self-discharge.
| No data available |
SOETECK SY-LI Series 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement is engineered as a drop-in solution for motive-power and stationary applications that previously relied on lead-acid blocks. Built around a robust LiFePO4 chemistry, the unit delivers 4.8 kWh of usable energy at a nominal 48 V / 100 Ah, while weighing only 37.5 kg—approximately one-third of an equivalent lead-acid pack.
A highly integrated Battery Management System safeguards every cell, balancing charge and regulating current up to 100 A continuous or 100 A pulse. The pack sustains ≥ 3000 cycles at 0.5 C and 80 % DOD, translating into an expected service life of five to ten years under normal conditions. Self-discharge is held below 3 % per month, minimising downtime in seasonal or standby roles.
Its rugged construction (IP6X ingress rating, operating range –20 °C to 55 °C) supports indoor and outdoor deployment, from AGV drive trains and recreational-vehicle house banks to solar-hybrid storage cabinets and critical emergency reserves. By combining high cycle life, low maintenance and rapid CC/CV charging, the SOETECK SY-LI Series 4.8 kWh 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement offers a clear pathway to lower total cost of ownership and improved system uptime for industrial and commercial operators.
Within the SOETECK SY-LI Series 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement range, the current model—internally designated LUB48100PA—offers a balanced specification of 48 V / 100 Ah, 100 A continuous discharge and an IP6X shell for dusty industrial sites. Its compact 522 × 240 × 218 mm housing and 37.5 kg mass simplify retrofits where space and weight are limited. Should future capacity variants be added, each will maintain the same BMS architecture and connection rules (series ≤ 2, parallel voltage Δ ≤ 2 V) to ensure seamless mixing within larger battery banks.
| Modelos | Tensión nominal | Rated Capacity | Length | Anchura | Altura | Total Height | Appox.Weight |
|---|---|---|---|---|---|---|---|
| SY-LUB48100PA | 48V | 100Ah | 522mm | 240mm | 214mm | 218mm | 37.5kg |
Data coming soon! Please revisit this page later, or reach out to us for additional details.
Ofrecemos atención al cliente 24 horas al día, 7 días a la semana, no sólo para vender productos, sino para proporcionar una asistencia completa.
Nuestro equipo especializado está siempre dispuesto a ayudarle con presupuestos, consultas personalizadas y asesoramiento experto sobre la selección de productos.
Si lo considera oportuno, indíquenos su sector de actividad o aplicación específica, así como los productos y servicios en los que está interesado. Esta información nos ayudará a ofrecerle una solución más personalizada y un presupuesto más preciso.
© HEFEI SHUYI DIGITAL POWER CO., LTD. Todos los derechos reservados.
© HEFEI SHUYI DIGITAL POWER CO., LTD.
Todos los derechos reservados.
