"(《世界人权宣言》) SOETECK SY-LI Series 48 V LiFePO4 Battery is a purpose-built replacement for traditional lead-acid blocks. Leveraging lithium iron phosphate chemistry and an integrated smart BMS, the module delivers high cycle life, rapid CC/CV charging, and dependable performance across harsh temperature ranges. Its reduced weight and compact form factor simplify installation in mobile, stationary, and backup power systems while lowering total ownership cost through longer service intervals and minimal self-discharge.
无数据 |
SOETECK SY-LI Series 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement is engineered as a drop-in solution for motive-power and stationary applications that previously relied on lead-acid blocks. Built around a robust LiFePO4 chemistry, the unit delivers 4.8 kWh of usable energy at a nominal 48 V / 100 Ah, while weighing only 37.5 kg—approximately one-third of an equivalent lead-acid pack.
A highly integrated Battery Management System safeguards every cell, balancing charge and regulating current up to 100 A continuous 或 100 A pulse. The pack sustains ≥ 3000 cycles at 0.5 C and 80 % DOD, translating into an expected service life of five to ten years under normal conditions. Self-discharge is held below 3 % per month, minimising downtime in seasonal or standby roles.
Its rugged construction (IP6X ingress rating, operating range –20 °C to 55 °C) supports indoor and outdoor deployment, from AGV drive trains and recreational-vehicle house banks to solar-hybrid storage cabinets and critical emergency reserves. By combining high cycle life, low maintenance and rapid CC/CV charging, the SOETECK SY-LI Series 4.8 kWh 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement offers a clear pathway to lower total cost of ownership and improved system uptime for industrial and commercial operators.
Within the SOETECK SY-LI Series 48 V Lithium Iron Phosphate Battery (LiFePO4) for Lead-Acid Battery Replacement range, the current model—internally designated LUB48100PA—offers a balanced specification of 48 V / 100 Ah, 100 A continuous discharge and an IP6X shell for dusty industrial sites. Its compact 522 × 240 × 218 mm housing and 37.5 kg mass simplify retrofits where space and weight are limited. Should future capacity variants be added, each will maintain the same BMS architecture and connection rules (series ≤ 2, parallel voltage Δ ≤ 2 V) to ensure seamless mixing within larger battery banks.
型号 | 额定电压 | 额定容量 | 长度 | 宽度 | 高度 | 总高度 | 约重 |
---|---|---|---|---|---|---|---|
SY-LUB48100PA | 48V | 100 安培 | 522 毫米 | 240毫米 | 214 毫米 | 218 毫米 | 37.5 千克 |
数据即将发布!请稍后再访问本页面,或联系我们了解更多详情。
我们提供 24/7 全天候的客户支持,不仅仅是销售产品,还提供全面的帮助。
我们的专业团队随时准备提供报价、量身定制的咨询和产品选择方面的专家建议。
如果方便,请提供您的行业背景或具体应用,以及您感兴趣的产品和服务。这些信息将有助于我们为您提供更加个性化的解决方案和准确的报价。
为了给您提供更好的体验,我们使用 cookie 来分析流量和提供个性化内容。您可以选择接受 Cookie 或管理您的偏好。如需了解更多信息,请参阅我们的 Cookie 政策和隐私政策。